11
10
Mobile Phone
Wireless Charging
Ⅰ
Sterilizer
PHONE TOASTER
User Manual
Troubleshooting
Problems
Confirmation and Measures
It does not operate at all.
Make sure if the power is properly connected.
The power is on, but the
sterilization indicator does not
light up.
Make sure if the mobile phone slot on the top of the
product is closed well.
The mobile phone does not
come out.
Remove the power and remove the mobile phone
manually with the slot opened.
The sterilization indicator is
turned off after 15 minutes.
This product is sterilized for up to 15 minutes. If further
sterilization is required, operate it again.
The charging indicator is off.
■
For mobile phones with wireless charging function,
make sure if the phone is placed in the center of the
slot with the phone facing the front.
■
Remove the mobile phone case and insert it into the
slot.
The foreign substance on
the mobile phone has not
disappeared.
This product operates only the sterilization function and
does not support the cleaning function.
Using the Bluetooth Speaker
1
Turn on the
Bluetooth Connection Switch
.
■
In the pairing standby status, the
(Bluetooth) LED blinks slowly.
2
Select
‘
PHONE TOASTER
’
on the device to be connected.
■
When pairing is complete, the
(Bluetooth) LED on with a beep sound.
■
After initial connection, turn on the
Bluetooth Connection Switch
to automatically
connect with the last paired device.
■
It is possible to connect to other devices via Bluetooth only when there is no device
connected to the product or the Bluetooth connection is disconnected.
■
When a Bluetooth device is already connected, pairing detection is not possible.
Using the Alarm Clock
Setting the time/alarm
Use the
Time/Alarm Setting Dial
to set the current time and alarm.
■
When the power is cut off, the clock stops after running for a certain period of time, so you need to set
the time again.
■
If an alarm is set, it is possible to turn it off by pressing the
Stop Alarm
button. (The alarm does not
sound when the button is being pressed.)
Turn on the clock light
If the surrounding is dark, it is possible to use the
Clock Light Switch
to turn on the clock.
Wired Charging of Mobile Phone
Check before use
Make sure if the product is powered.
Connect the mobile phone to the
USB Charging Terminal
on the back of the product using
a standard USB cable.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this
device that are not expressly approved by the manufacturer
may void the user's authority to operate the equipment.
FCC Part 15.105
Note : This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Modifications not expressly approved by the manufacturer
could void your authority to operate the equipment under
FCC rules.
RF Radiation Exposure Statement :
This equipment complies with FCC RF Radiation exposure
limits set forth for an uncontrolled environment. This device
and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
■
Name of Company : SK Networks Co., Ltd.
■
Manufacturer / Country : Devatec Co., Ltd. / Korea
■
Product Name : PHONE TOASTER
