5
Stello M200
Connection to the preamplifier should be made with either Unbalanced interconnect cable
or Balanced interconnect cable.
Interconnect between main output of preamplifier and power amplifier input. Be aware that
‘Left’ and ‘Right’ are correct.
<<IMPORTANT!>>
Do NOT connect to Unbalanced input and Balanced input
simultaneously. Make sure to connect only one you wish to use.
After every connection is completed, turn on the main power switch which is located on the
rear panel. The indicator on the front panel will change to red showing that the product is in
standby position.
Press ‘STANDBY’ button on the front panel to turn the amplifier on.
The ‘red’ LED will change to ‘green’ to show the amplifier is ready.
When using a 12V Trigger, connect one end of the ordinary RCA type cable to the output
terminal of the 12V Trigger of the preamplifier or surround processor, while the other end
should be connected to the Trigger terminal of M200.
