Installation Procedures:
MAC Users:
1. Insert the Dual Igniter 400 CD-ROM into the CD-ROM drive.
2. Double click on the FireWire_OHCI_Installer.hqx.
3. Double click on the FireWire OHCI Enabler Installer. (This is the file that you just
unzipped.) Once installed, the wizard will ask you to reboot your computer. By
rebooting, the new setting will take effect.
4. Insert the Dual Igniter 400 CardBus Card into the PC Card slot on your computer
until it is firmly seated.
5. A new FireWire PC Card icon will appear on the desktop.
Unplugging Your Dual Igniter 400 CardBus
Card
PC Users:
Click on the Windows Unplug or Eject Hardware icon in your system tray (located in
the bottom right corner of your computer screen). Click on stop Texas Instruments
OHCI IEEE 1394 Host Controller. A dialog box will appear to tell you it is safe to
remove the device. Once this appears, click OK and remove the card.
MAC Users:
1. Click on FireWire PC Card icon.
2. Drag the icon to the trash.
3. Wait until the disk icon disappears from the desktop before disconnecting the card.
