www.apricorn.com
12
Password Management
Changing the Admin Password
Note: If the indicator light flashes red three times, this indicates that the
password is less than 6 digits or more than 16 digits. Enter a
password that contains 6 – 16 digits after the indicator light flashes
blue intermittently.
If the indicator light flashes red intermittently and then blue
1.
intermittently, go back to step 3. This is due to one of the following
conditions:
You waited longer than 10 seconds before entering a password.
•
The new password was entered incorrectly.
•
If no activity is detected within two minutes in the Admin Mode, the
2.
Aegis Padlock Pro will return to the Standby Mode.
To enter Admin Mode, first plug the drive into the USB port and wait
1.
until the LED light turns RED.
Next, press and hold 0 + for 5 seconds until the LED light flashes RED.
2.
Enter the Admin PIN number (default is 123456) and press . The
3.
LED light will turn BLUE indicating you are in Admin Mode.
While in Admin Mode, press and hold 9 + until the LED light flashes
4.
BLUE.
Enter the new PIN number (minimum 6 digits) and press . The LED
5.
light will flash GREEN 3 times if successful.
Re-enter the new PIN number and press . The LED light will stay
6.
solid GREEN for 2 seconds indicating you have successfully changed the
Admin PIN.
To exit admin mode and begin using your Aegis Padlock Pro drive, press
7.
the CANCEL button until the LED turns RED. Now enter your new PIN
number and press .