Using the wall charger
• Connect the battery to the char-
ger and place the switch on the
battery to the ON position “I”.
• Connect the charger to the wall
outlet. A
RED
light indicates that
the battery is charging. When
the battery is fully charged, the
GREEN
light will illuminate.
• Disconnect the charger, and switch the battery to the off
position “O” until use.
Using the car charger
• Connect the battery to the charger
and place the switch on the battery
to the ON position “I”.
• When plugging the car charger into
the car socket (without the battery
attached), the light will be
GREEN
.
• When the battery is attached, the
charger light should change to
RED
.
• When fully charged, the light will illuminate
GREEN
.
Note:
the car charger is supplied with the sprayer kit but
not with replacement batteries. To obtain a car charger,
order ConidioTec part# 30116.
NOTES & TIPS
Power Switch
12V Input/
3A Output
LED Indicators
LED INDICATORS
There are 5 LED
battery-strength
indicators.
1 or 2 green lights:
Do not run the compres-
sor. Recharge battery
prior to use, or product
application will be com-
promised.
3, 4, or 5
green lights:
Sufficient
charge to run
compressor.
CHARGING THE BATTERY
Battery
must
be in the ON
position when charging.
!
Do
NOT
use the compressor
AC adapter to charge the
battery. Damage to the
battery will occur.
!
• The battery comes partially charged. Apply a topping charge
for 2–3 hours before use.
• To ensure long battery life do not discharge completely.
• Recharge the battery every 3 months when not in use. Never
leave the battery in the discharged state for long periods.
• All lithium-ion rechargeable batteries are consumables and
have a limited lifespan. Capacity and performance will decline
over time. Contact us for replacement units.
• It’s a good idea to have at least one spare battery and rotate
their use to ensure consistent work flow.
• Recharge battery frequently.
• The compressor has an auto-off feature: when the gun is
connected via the air hose, the compressor will run to reach
optimum spray pressure, then rest until the trigger button
on the gun is depressed. Battery consumption during au-
to-off rest is minimal. However, always turn the battery off
between jobs to preserve battery life.
• The battery is designed for a slow charge process (8 ~ 10
hours for full charge). An extended, uninterrupted, complete
charge extends battery life.
ON
