OPENING THE DINING BOOSTER
First press both buttons (G) fully inwards to release the tray (C) (1).
The tray (C) will slightly lift up automatically (2).
Open the legs fully and open the back support (I), then lift tray (C) until you hear a
“click” (3).
Push the front corners of the seat down until you hear a “click” (4). (See Lock
Symbol).
SECURING YOUR DINING BOOSTER
Place the dining booster centrally on a stable chair and does not extend over the
edges of the chair (5).
To make the dining booster horizontal, rotate the anti - slip feet (F)
on the base
before attaching the leg securing straps (E) (6).
Fit the leg securing strap (E) on one side of the dining booster, pass under the chair
and then reattach to the opposite side of the dining booster (7).
Tighten the strap on both sides of the dining booster to ensure a secure fit (8).
Open the rear securing strap (J) and pass it around the backrest of the chair and
connect the buckle, tighten the strap (9).
Open the harness buckles, place the child onto the dining booster, this is best done
with the tray (C) removed (11). Then secure the harness and tighten the harness
straps (A) fully.
REMOVING AND INSTALLING THE TRAY
Remove the tray (C) by pressing the two tray release levers
(D)
on the under - side
of the tray (C) and lift upwards (10).
Reverse this procedure until you hear a “click” to install the tray (C) back to the
dining booster (12).
FOLDING THE DINING BOOSTER
Press both buttons (G) fully and press the tray (C) downwards (13).
Lift the seat up until it snaps out of position (14). Close the legs and back support (I)
together then fold the tray (C) down, until you hear a “click” (15).
* When you press the buttons (G), normally the tray (C) will come downwards
slightly. But for new products that used for the first several times, maybe needs to
slightly press the tray (C). This is not a quality issue.
CLEANING
Wipe with a damp cloth and air dry. Do not immerse in water.
INSTRUCTION
