SRC-64
64 channels at 96kHz (48ch with AES50), or 32ch at 192kHz.
When ready, push
OK
to confrm.
If you need only asynchronous outputs, select "X" for the
inputs.
This disables the receive part of the ASRC, and all inputs run
now on the main clock.
3.3.
Select the async output
This selects the output interface whose data is converted from the multiverter's
main clock/sample rate to the
async clock
on output.
Some interfaces (AES50, Dante/AES67) do not allow diferent
receive and transmit clocks. When such an interface is selected
as input, the output runs automatically at the same clock and
cannot be chosen separately.
Assign the input as described. When this is fnished, the seven-segment display
shows
0u
to indicate the output selection mode.
Select the appropriate output column(s). The example shows how to select
"MADI optical" as asynchronous output:
Note
: For some confgurations it is possible to select two rows at once. This is
used if you want to concatenate two outputs together to make use of all 64
channels at 96kHz (48ch with AES50), or 32ch at 192 kHz.
Selecting "X" disables the ASRC for the output direction.
9
