Appsys ProAudio ADX-32A, User Manual

Page: 9 / 20

ADX-32A / ADX-64A-PRO
7. Rear panel connections
7.1. Power Input
Power supply of the device. Use only the supplied DC adapter or a replacement with the
indicated voltage, power, polarity and matching connector (see
12. Specifications ). The input
has a reverse-polarity protection. If the Power LED does not go on when a DC adapter is
connected, check the polarity (inner positive).
The second module in the 64 channel version is internally supplied with power.
7.2. ADAT 1-4
ADAT Lightpipe inputs and outputs 1-4. The direction (TX or RX) must be set using the DIP
switches, see 8.2. Transmission direction (ADAT 1-4) .
7.3. ADAT 5-8/Wordclock (ADX-64A-PRO only)
ADAT Lightpipe Inputs/Outputs 5-8 and wordclock Input/Output. The direction (TX or RX) must
be set using the DIP switches, see
8.2. Transmission direction (ADAT 1-4) .
Channel 5 can either be used as ADAT or as wordclock transmission, see 8.4. Channel 5 mode
selection (ADAT or Wordclock).
ADATs 5-8 may also be used to build a simple ADAT splitter. To do this, connect “Cat5
connection 1” to “Cat5 connection 2” using a short Cat5 cable
9