61
relevant digits to modify it.
• Band Width: the default value of bandwidth is 64MHz. While you can
set it to 6MHz,7MHz,8MHz.
3. Press “
OK
” key after configuration of parameters to start manual scan.
4. If any program is detected and the scanning process is finished,
system will exit the scanning page and save the program, at the same
time return to the “
installation menu
” and to play them in vpp window
automatically.
5.1.3 AUTO SEARCH
You can search the programs of any channel.
1. You can move the cursor to “area search” via press “
UP/DOWN
” key
under “installation menu”, then press “
OK
” to enter into area searching
page.
2. Prior to auto searching, you need to configure relevant parameters
including:
• Start Freq (KHz): the default frequency is 474000 KHz. You can input
relevant digits to modify it.
• End Freq (KHz): the default frequency is 474000 KHz. You can input
relevant digits to modify it.
• Band Width: the default value of bandwidth is 64MHz. While you can
