Approach Tech LC-7314 Installation & Operation Manual Download Page 49

Page: 49 / 106

Change the System Setting — Audio Mechanism.

Please follow the steps below to change the Audio Mechanism through the network if necessary.

1. Click

the

Audio Mechanism

button on the left side of the “Date and Time” page to enter the “Audio

Mechanism Setting” page.

Mark the “Audio Mechanism” “ON” or “OFF”.

Choose one of the audio sources. The two sources are “Audio In” and “Mic” (microphone).

4. Click

the

Submit

button to submit the new user’s settings.

5. Click

the

Home

button to return to the home page.

NOTE

This setting is for turning the audio mechanism of the Camera on/off automatically.

The Live audio service is only provided in the H.264 mode via the Web browser.

Description of function keys:

Audio Mechanism:

Select “ON” or “OFF” to activate or deactivate the function.

Audio Source:

Select “Audio In” or “Mic” (microphone) from the audio sources.

Summary of Contents for LC-7314











































































































Search results

Summary of Contents for LC-7314

Reviews:

Approach Tech LC-7314, Installation & Operation Manual, Page: 49 / 106

Search results

Summary of Contents for LC-7314

Reviews: