Hardware Installation
1. Plug in the power connection to the IP camera.
2. Plug in the IP camera cable.
3. Confirm the correct network connection status (PC/HUB/ IP camera).
4. In the PC IE Browser, key in the camera’s IP online to link up to the live first
page.
WARNING
To prevent fire or shock hazard, avoid exposing this unit to rain or
moisture.
Do not block ventilation openings.
Do not place anything on top of the unit that might spill or fall into it.
Do not attempt to service this unit yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Please
refer all servicing to your distributor / retailer.
Do not use liquid cleaners or aerosols for cleaning.
To prevent fire or electric shock, do not overload wall outlets or
extension cords.
PoE warning : If the PoE injector is used instead of the supplied power
adaptor, all of the wiring to and from the injector must be routed/
installed inside a building/ plant and never routed/ installed outside of
the building/ plant.
Please only select a power adapter or power certified by UL and marked
at 24Vac / 60 Hz, minimum 1A, class 2 or LPS.
The interconnecting cables should be placed inside the UL certified
Outdoor Use Conduits.
Les câbles d’interconnexion doivent être places à l’intérieur des
Conduits d’Utilisation Extérieure certifiés UL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
ATTENTION
RISQUE D’EXPLOSION SI LA PILE EST REMPLACEE PAR UN TYPE
INCORRECT. DEBARRASSEZ-VOUS DES PILES USAGEES EN SUIVANT
LES INSTRUCTIONS.
3
RMN0100550