88
2. SETUP
Application button
Motion Detection button.
3. Select “Enable Video Motion”.
4. Set up the target zone you want and setup the Sensitivity and Percentage.
5. Click the
Submit
button to submit the setting.
6. When any person or object moves within the target zone under a setting, the Motion
Detection will display the response signal in the Live Video and Video Out.
Question 5:
How do I use the DynDNS to connect the IP camera by using its Sub Hostname via the
intranet?
◇
Set the DDNS function
1. Click on the
Network
button in the home page.
2. Click on the
Dynamic DNS
button on the left side of the page to enter the “Dynamic DNS”
page.
3. Tick on the “Enable DDNS” to activate it.
4. Enter the DDNS Host Name, DDNS Account and DDNS Password which you created in the
www.dyndns.com website.
5. Click on the
Submit
button to submit the setting.
NOTE:
Please refer to the
APPENDIX 2
for more details.
◇
Set the PPPoE function
1. Click on the
Network
button in the home page.
2. Click on the
PPPoE
button on the left side of the page to enter the “PPPoE” page.
3. Choose “Enable” to activate the function.
4. Enter the Account and the Password which are provided from your ISP.
5. Click on the
Submit
button to submit the setting.
NOTE:
Please refer to section
5.1.3.8
for more details.
◇
Use the Sub Hostname to view the IP camera
1. Click on the URL block at the top of the PC screen.
2. Enter the DDNS Host Name of the IP camera into the URL block and press the “
Enter
”
button to enter the login page.
3. Enter the user name and fill in the password.
4. Click on the “
OK
” button and enter the home page of the IP camera.
Question 6:
How do I add or modify the users and their authority to use the IP camera?
◇
Entering the setting page
1. Click the
System
button in the Setup page.
2. Click the
User
button on the left side of the page to enter the “USER” page.
