Appro LC-6770 Installation & Operation Manual Download Page 85

Page: 85 / 97

7. SPECIFICATIONS

Model LC-6770

Image sensor

1/4” OmniVision 720P CMOS sensor

Lens

Fixed Focal Board Lens f:3.6mm F1.8.

Minimum illumination

Color: 1.0 lux, B/W: 0.5 lux.

IR cut filer

Yes

Camera

Day & Night

Auto / Day / Night / Schedule.

Video Compression

H.264/ MJPEG.

Resolution

“4:3”: 960x720, 800x592, 640x480, 480x360, 320x240.

“16:9”: 1280x720, 800x448, 640x360, 480x272, 320x176.

Frame Rate

NTSC: Maximum 30FPS (1280x720).

PAL: Maximum 25FPS (1280x720)

Video streaming

- Simultaneous H.264 and MJPEG.
- Multi-profile: resolution / compression / frame rate / video

quality.

Profiles 2

(selectable)

Image settings

- Adjustable image size, quality, and bit rate.
- Day / Night mode.
- Flip & Mirror.
- AGC, AWB, AES.
- Time stamp and text caption overlay.
- Privacy masks.
- Exposure Mode

Image

Video management
software

SDK, including HTTP-API / ActiveX / ONVIF.

Audio streaming

Two-way.

Compression G.711u
Audio bit rate

G.711u 64kbps

Audio

Inputs / outputs:

1 x input / 1 x output

Security

Multi-level password protections, IP address filtering, HTTPS

encryption, User access log.

Protocols

IPv4, HTTPS, HTTP, TCP, UDP, RTP/RTCP/ RTSP, DHCP, NTP,

FTP, SMTP, UPnP, ICMP, ARP, DDNS, PPPoE, SAMBA.

Users

Access by 10 simultaneous users.

Network

Firmware update

SD card / HTTP.

Recording

SD card, SAMBA, FTP

Pre-alarm recording

Yes.

Advanced motion

512 zones. Sensitivity: 0 - 100 %.

Trigger

Motion Detection

Schedule

Alarm input

Ethernet loss

Alarm

Notification

SD card recording, SMTP, FTP, HTTP, alarm output.

Summary of Contents for LC-6770


































































































Search results

Summary of Contents for LC-6770

Reviews:

Related manuals for LC-6770

Brands by name

Popular brands

Appro LC-6770, Installation & Operation Manual

Search results

Summary of Contents for LC-6770

Reviews:

Related manuals for LC-6770

Brands by name

Popular brands