INITIALIZING
13
SP-7260 Multi Function POS
CHAPTER 5 INITIALIZING
When using this scanner for the first time, you need to initialize the
communication.
parameters first. Follow the steps below to initialize:
1. Power up POS.
2. Initialize the communication parameters by scanning the programming
barcode 1.1 and 1.3 on the APPENDIX (A. Change Scanner Settings).
NOTE
The procedure is required only once. However, when changing the cable
from one type to another, you need to perform the procedure again.
3.
In USB mode, the scanner defaults to Keyboard Emulation Mode. This
scanner transmits the data in International Keyboard layout (ALT-method)
for communication.
NOTE
The USB must be directly connected to the host-USB port and not
through an (un-powered) USB hub.
5.1 SCANNING BARCODES
This scanner is an omni-directional presentation scanner featuring a 6
directional scan field with a 24-line scan pattern. Barcode labels can easily be
read by presenting them to the scanner.
NOTE
Since this scanner is a presentation scanner, best results are obtained if
the barcode is moved towards the scanner.
All manuals and user guides at all-guides.com
