1
THIS IS NOT A PERSONNEL
LIFT AND NEVER SHOULD BE
USED FOR HOISTING OR
MOVING PEOPLE.
OPERATOR SAFETY INSTRUCTIONS
IMPORTANT
Read and understand this
instruction manual prior to operating or
performing maintenance on this lift!
1. INSPECT THE EQUIPMENT
Prior to each use of the unit, check all
moving parts and wire rope to ensure that
they are in proper operating condition.
If a unit has visible damage or does not
transfer up and down smoothly during
pre-operation,
do not use the unit!
If cable is kinked, worn, frayed, damaged,
or has any debris on it that would obstruct
its rotation around the pulley wheels,
do
not use the unit!
Each unit should have a complete set of
caution decals and a legible Operators
Manual. Contact Applied if any of these
items are missing.
Do not misuse the unit. Perform only the
functions for which the unit is designed.
Never attempt to operate the equipment
at more than the recommended capacity.
DO NOT EXCEED RATED CAPACITY!
KEEP HANDS AWAY FROM
ALL MOVING PARTS WHILE
OPERATING UNIT.
NEVER ATTEMPT TO WORK ON
CABLE OR PULLEY SYSTEM
UNLESS MAST ASSEMBLY IS IN
THE LOWEST POSSIBLE
POSITION.
Use only Applied replacement parts.
Non-OEM parts will severely compromise
the quality and safety designed into this
lift.
2. WORK AREA HAZARDS
Never
operate
during
high
wind
conditions. Lifting loads during high winds
can result in the lift tipping over and the
possibility of operator injury.
Operate only on level surfaces. Use the
unit on smooth and level surfaces to
avoid unit tipping over and the possibility
of operator injury. Do not operate from an
unstable platform.
Always watch for and avoid overhead
wires and obstructions when using the
unit or moving unit to and from the event
site.
Do not use unit to support ladders, for
climbing, hoisting or people moving.
Do not use unit outside in thunder,
lightning or severe weather.
