background image

O

NE 

Y

EAR 

L

IMITED 

W

ARRANTY 

(USA) 

Products manufactured by APPLIED WIRELESS, 
INC. (AW) and sold to purchasers in the USA are 
warranted by AW according to the following 
terms and conditions. You should read this 
Warranty thoroughly. 

 

WHAT IS COVERED

,

 AND DURATION OF COVERAGE

AW warrants the product to be free from defects 
in materials and workmanship for one (1) year 
from the date of purchase by the original end user 
purchaser.  

 

WHAT IS 

NOT

 COVERED

This warranty does not apply to the following: 
1.

 

Damage caused by accident, physical or 
electrical misuse or abuse, improper 
installation, failure to follow instructions 
contained in the User’s Guide, any use 
contrary to the product’s intended function, 
unauthorized service or alteration (i.e. 
service or alteration by anyone other than 
AW). 

2.

 

Damage occurring during shipment. 

3.

 

Damage caused by acts of God, including 
without limitation: earthquake, fire, flood, 
storms, or other acts of nature. 

4.

 

Damage or malfunction caused by the 
intrusion of moisture or other contamination 
within the product. 

5.

 

Batteries supplied by AW in or for the 
product. 

6.

 

Cosmetic deterioration of chassis, cases, or 
pushbuttons resulting from wear and tear 
typical of normal use. 

7.

 

Any cost or expense related to trouble-
shooting to determine whether a 
malfunction is due to a defect in the product 
itself, in the installation, or any combination 
thereof. 

8.

 

Any cost or expense related to repairing or 
correcting the installation of an AW 
product. 

9.

 

Any cost or expense related to the removal 
or reinstallation of the product. 

10.

 

Any product whose serial number or date 
code is altered, defaced, obliterated, 
destroyed, or removed.  

This warranty is extended to the original 
purchaser of the product(s) only, and is not 
transferable to any subsequent owner or owners 
of the product(s). AW reserves the right to make 
changes or improvements in its products without 
incurring any obligation to similarly alter 
products previously purchased. 

 

EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES

AW expressly disclaims liability for incidental and 
consequential damages caused (or allegedly 
caused) by the product. The term “incidental or 
consequential damages” refers (but is not limited) 
to: 
1.

 

Expenses of transporting the product to AW 
to obtain service. 

2.

 

Loss of use of the product. 

3.

 

Loss of the original purchaser’s time. 

 

LIMITATION OF IMPLIED WARRANTIES

This warranty limits AW’s liability to the repair 
or replacement of the product. AW makes no 
express warranty of merchantability or fitness for 
use. Any implied warranties, including fitness for 
use and merchantability, are limited in duration to 
the period of the one (1) year express limited 
warranty set forth herein. The remedies provided 
under this warranty are exclusive and in lieu of all 
others. AW neither assumes nor authorizes any 
person or organization to make any warranties or 
assume any liability in connection with the sale, 
installation, or use of this product. 

Some states do not allow limitations on how long 
an implied warranty lasts, and some states do not 
allow the exclusion or limitation of liability for 
incidental or consequential damages so the 
limitations or exclusions stated herein may not 
apply to you. This warranty gives you specific 
legal rights and you may have other rights which 
vary from state to state. 
 
 
 
 

(continued on next page) 

O

NE 

Y

EAR 

L

IMITED 

W

ARRANTY 

(USA),

 

cont. 

 

HOW TO OBTAIN WARRANTY SERVICE

If a product covered by this warranty and sold in the  USA  by  AW  proves  to  be  defective  during  the 
warranty period AW will, at its sole option, repair it or replace it with a comparable new or reconditioned 
product without charge for parts and labor, when said product is returned in compliance with the 
following requirements: 
1.

 

You must first contact AW at the following address/phone for assistance:  

APPLIED WIRELESS, INC. 

1250 Avenida Acaso, Suite F 

Camarillo, CA 93012 

Phone: (805) 383-9600 

If you are instructed to return your product directly to the factory, a Return Merchandise 
Authorization number (RMA) will be issued to you. 

2.

 

You must package the product carefully and ship it insured and prepaid. The RMA number must be 
clearly indicated on the outside of the shipping container. 

Any product returned without an RMA 

number will be refused delivery.

 

3.

 

In order for AW to perform service under warranty, you must include the following: 

(a)

 

Your name, return shipping address (not a PO Box), and daytime telephone number. 

(b)

 

Proof of purchase showing the date of purchase. 

(c)

 

A detailed description of the defect or problem. 

Upon completion of service, AW will ship the product to the specified return shipping address. The 
method of shipping shall be at AW’s sole discretion. The cost of return shipping (within USA) shall be 
borne by AW.  

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for KTXW303C6-1









Reviews: