background image

SPECIFICATIONS:

Power:

12VAC, 6VA Max, 50/60 Hz (DIP switch selected).  A power module is provided

Format:

12 or 24 Hour Format (DIP switch selected).  AM/ PM Indicator (upper left-hand corner of display)

Set time:

Set Switches - Increment Hours and Minutes, accessed at the back panel

Backup:

Capacitive Backup (no batteries reequired).  Keeps time for up to one hour during power outages

Accuracy:

Synchronous with the 50 or 60 HZ AC line.  0.003% crystal during backup.

Enclosure:

Black ABS plastic enclosure with red acrylic lens.  Measures 12"W x 6.1"H x 3.5"D.

The CC2003 can be programmed to your requirements:

DIP switch 1

Set to HH:MM for displaying hours and minutes.  Set for
MM:SS to display minutes and seconds.

DIP switch 2

Set for 12 or 24 hour format.

DIP switch 3

Set for 50 or 60 HZ operation.

Factory settings are HH:MM, 12HR, and 60HZ

Connect  power:

A power module is provided. Insert the power plug into the power jack, as
shown.  Plug the power module into your standard AC receptacle.

Time will be displayed (12:00 or 0:00) according to the settings above.

Set the time:

Press the HOURS push-button until the desired hours are shown.  An
AM/PM indicator is provided in the upper left hand corner.
Press the MINUTES push-button until the desired minutes are shown.
To synchronize with another clock, set the matching minute at the instant
the reference clock updates its minute.

12.0

3.5

4.0

6.1

INSTALLATION:

The CC2003 can be wall mounted in the
same manner as you would hang a picture
or another type of clock.  For best results,
secure a #8 or larger pan head screw to the
wall.  The screw should extend about 1/2" to
3/4" from the wall.  Hang the CC2003 on the
secured screw.

For shelf mount set the CC2003 on a secure
flat surface.

Reviews: