Applied Precision ISOMET 2114, User Manual

Page: 20 / 30

ISOMET 2114
User
’s Guide
www.appliedp.com 20
4.3.3 System Settings
System Settings page contains general parameters of the system of the device.
Page is showed in two screens and switching between them is done by key
F5 .
System Settings screen 1/2 System Settings screen 2/2
Content:
Date ........................................ actual date
Time ........................................ actual time
Language ............................... selection of language of devices user interface
BAUDRATE ............................ settings of baud rate of device communication interfaces
RS-232 ......................... baud rate of RS-232 communication interface: 300, 600, 1200, 2400,
4800, 9600, 19200, 28800, 38400, 57600 or 112000
USB ............................. baud rate of USB communication interface: 300, 600, 1200, 2400,
4800, 9600, 19200, 28800, 38400, 57600 or 112000
BACKLIGHT ........................... settings of backlight of display
Intensity ....................... backlight intensity
: 10%, 20% … 90% or 100%
Auto off timeout ......... automatic backlight switch-off time: 1 / 2 / 5 / 10 / 20 / 30 min or
OFF (inactive)
POWER SUPPLY ................... settings of power supply
Auto off timeout ......... automatic power switch-off time: 1 / 2 / 5 / 10 / 20 / 30 min or 1 / 2 / 4
h or OFF (inactive)
SOUNDS ................................. settings of sounds
Keypad beep ............... acoustic indication of keys pressing: ON or OFF
End of meas. beep ..... acoustic indication when measurement is finished: ON or OFF
End of test beep ......... acoustic indication when test is finished: ON or OFF
Control keys:
F1, ESC ....................... exit (return to previous page)
F4 ................................ save all changes into memory (will be loaded after next switch on)
F5 ................................ switching between screens 1/2 and 2/2