Model 5112 Operation Manual
Applied Instruments Inc
8. RF out - Female RF output F-connector with replaceable barrel. Connect to the
cable system being tested. This port includes a blocking capacitor which will
block DC or AC voltage up to 200 Volts. Higher voltages will damage the
instrument.
2.2 Rear Panel
1.
A.C. Cord Attachment - 120/240V 50-60 Hz power attachment receptacle
a) Type IEC 60320-1 C-13
b) 1.5 amp cord rating (typical AC operating current <100 mAmps)
2.3 AC Operation
When operating the instrument from AC power, adhere to these rules:
1. Warning: The appliance coupler is used as the disconnect device. Do not position
the instrument so that it is difficult to operate the appliance coupler.
2. Use only the cord supplied with the unit or an equivalent cord rated for at least 1.5
Amps and containing a protective earth ground conductor.
3. Warning: The AC plug shall be connected to a mains socket outlet with a
protective earthing connection.
5
