APPLIED ELECTRONICS L-16, Operation Manual, Page: 3 / 14

APPLIED ELECTRONICS L-16 CRANK-UP LIFT
WINCH INSTALLATION
- READ THIS FIRST -
(1) The L-16 lift and winch assembly are packaged separately. The lift is shipped with the
steel cable installed. Take care when removing the winch from the carton as the lift
leveling feet and other small parts are packaged with the winch.
(2) Attach winch to platform mounting channel using (3) 3/8” x (3) 1-1/4” bolts provided.
See figure 1 below.
(3)
Place bolts through holes and hold in place.
(4)
Place winch over bolts and secure with 3/8” flat washers and 3/8” self-locking nuts.
(5)
Install leveling pads to the bottom of each fold-out leg. (See page 4 for details).
(6)
Continue with operation instructions on page 2.
Page 1
Figure 1.