Applied Biosystems GeneAmp PCR System 9700, User Manual

Page: 65 / 132

Running PCR Samples 4-9
Stopping a Run
Before It Completes
The following procedure describes how to stop a run before it completes.
To stop a run before it completes:
Step Action
1 Press the Stop key.
The
Stop confirmation
screen appears.
The run pauses for a pre-programmed period of time. When the pause time expires,
the run aborts.
Press Resume to resume.
Note The stop and pause times are configured by setting the Pause Time Out . See
“Setting the Pause Time Out” on page 3-10.
2 Press the
Stop
key again.
This stops the run and the
End of Run
screen appears.
If any errors occur during a run the following message appears, “Exception
occurred, check history file.” Press
HIST
to review the history file.
3 Press Exit to return to the Main menu.
Sample 50.1 Confirm Stop HOT
Press STOP to abort.
Press Resume to continue.
F1 F3 F4 F5 F2
Resume
11:30 AM 25.1°C
Method:exp001
Run aborted at 11:30:05 AM 01/01/00.
Length of run is 01:34:25.
End of Run
F1 F3 F4 F5 F2
Hist Exit