manualshive.com logo in svg

Applied Biosystems Data Explorer 4 Series, User Manual

Share
Download
Applied Biosystems Data Explorer 4 Series User Manual Download Page 196

Chapter  4    Examining Chromatogram Data

4-24

Applied Biosystems

4

Hint: Add mode is useful when you filter the same trace for 
different event tags. The original trace remains displayed 
and accessible. Each filtered trace (up to four total traces) 
is added, allowing for visual comparison.

Filtering

event tags

To display chromatogram traces for selected event tags:

1.

Display the data file containing the event tags.

2.

Click the Chromatogram window to activate it. 

3.

From the Display menu, select Traces, then select the 
trace type to filter.

4.

If you have more than one trace displayed, select the 
trace to filter.

5.

From the Process menu, select Event Tag Filtering.

NOTE: If the Chromatogram window is not active, 
Event Tag Filtering is not displayed on the Process 
menu. If the active chromatogram was not collected 
with an MS Method that specified event tags, the Event 
Tag Filtering command is dimmed.

The Event Tag dialog box is displayed (Figure 4-10).

Figure 4-10  Event Tag Dialog Box

Summary of Contents for Data Explorer 4 Series
































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands