Applied Biosystems 3500 User Manual Download Page 139

Page: 139 / 326

The 3500 Series Data Collection Software 3.1 libraries include factory-provided items

that are optimized for different applications (for example, instrument protocols with

specific run modules and primary analysis protocols with specific settings). You can

use the factory-provided items directly. If the factory-provided items do not suit your

needs, you can do one of the following:

• Duplicate and modify a factory-provided item, and save the item with a new

name.

• Create a new item.

Entries in the library may be flagged with the following symbols:

•

Factory-provided. Cannot be edited or deleted.

•

Template.

•

Locked. If the SAE module is enabled on your system, a locked item can be

unlocked and modified by the user who created it, the administrator, or another

user with unlock permissions. For information, see Chapter 8, “Use Security,

Audit, and E-Sig functions (SAE Module)“ .

General library procedures

Click the Library tab to access the Library workflow.

You can click Main Workflow, or select Dashboard or any other menu item at any

time to advance from the Library workflow.

Factory-provided

template and

locked items

Access libraries

Chapter 7

Manage library resources

General library procedures

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

139

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands