MNAPPR11072005V1.0
Page 7
Installation and Operation
Installation and Operation
Installation and Operation
Installation and Operation
Installation and Operation
Quick Start
Quick Start
Quick Start
Quick Start
Quick Start
Before beginning installation ensure that your PC is turned off. Follow the Steps
indicated for the Presenter Package you have.
1.
Install the Presenter PCI card into an available PCI slot in your computer.
2.
(Presenter) Connect the CAT5 to VGA adapters to the 4 CAT5 connectors
on the Presenter Card.
(Presenter Pro) Use 4 CAT5 cables to Connect the Presenter Card to the
inputs on the SLX-TX400.
3.
(Presenter Pro) Run a CAT5 cable from the transmitter to the remote
location of your screen. Connect a remote station (SLX-RX100) into each
end of those CAT5 cables that you will be using.
4.
(Presenter)Connect remote monitors to the ends of the CAT5/VGA cables.
(Presenter Pro) Connect monitors and/or speakers to SLX-RX100 units.
Then connect the external power supply to the AC IN connection of the
SLX-X400 unit. (Optional) Connect power adapters to the SLX-RX100 units.
5.
Power on your PC.
6.
Windows will now recognize that new hardware has been installed. Allow
it to detect all of the hardware. This could take a few minutes.
7.
Install the provided ApplicaXP software (includes drivers) and the Presenter
Software.
8.
Reboot your computer.
Presenter
Presenter Pro
