Instructions for use
Read the instructions carefully before using the device
Safety warnings
-
Choose a place close to a power point. Check that the line and socket are in good
condition.
-
Before plugging in the product make sure that the cable is in good condition.
-
Do not position the device immediately below or above the wall-mounted socket.
-
Before switching it on check that the power supply voltage corresponds with the
voltage indicated on the device plate.
-
When disconnecting the plug never pull the cable.
-
Make sure that during operation the product is not installed in places where air
cannot circulate properly or where it is directing heat at furniture or curtains.
-
Do not use the device in the immediate vicinity of a bath, shower or swimming
pool.
-
No not use the device near a blind or other flammable material.
-
Do not use this product with a programmer or timer or any other device that
switches it on automatically, since there is a fire risk if it is covered or incorrectly
positioned.
-
Prevent children from touching the device when it is switched on.
-
The device is always used horizontally.
-
The fall cut–off feature is an incorporated safety device that cuts the power supply
when the device becomes loose and is vertical.
-
Do not use the device in spaces that are not covered
-
Never obstruct any of the device’s grilles
-
Do not use the device in areas where flammable objects are stored.
-
If the power supply cable is damaged, it must be replaced by the authorized
technical services to avoid any danger.
-
Do not place the cable in front of the device.
-
Do not cover the device either totally or partially, since it can cause deformation
of the component parts.
Components:
1.
Filter
2.
Cover
3.
Computerized control panel
4.
Airflow grille
5.
Function/Off button
