Appliance 365 UEHS601SS, User And Installation Manual

Page: 9 / 16

appliance (see data plate).
2) The power supply system has an Earth connection in good working order in accordance with
the Regulations in force;
3) The omni polar isolation switch used is easily accessible with the appliance installed.
4) When the appliance is installed above a built in oven, the two appliances must be connected
to the electrical supply separately to ensure the easy removal and safe operation of the
appliances.
5) The supply cable must be positioned so that it does not reach a temperature of 50°C above
the room temperature at any point.
If you wish to make a direct connection to the mains, an omni polar switch with a separation gap
between the contacts of at least 3 mm, with suitable R.C.D. / R.C.C.B., current rating for the load
and complying with the regulations in force, must be installed between the appliance and the
mains. The switch must not break a contact in the yellow/green Earth wire.
The Brown live wire (connected to the “L” terminal of the terminal board) must always be
connected to the live wire of the power supply.
The Blue neutral wire (connected to the “N” terminal of the terminal board) must always be
connected to the neutral wire of the power supply.
If the supply cable should need to be replaced, use only H05VV-F 3*2.5mm².