61
SCPI Command Reference
SETUP:CH:LIMIT <ch>,<lower>,<upper>
Setting Lower/Upper Limit of an appointed channel
11.5.1
SETUP:CH?
SETUP:CH? Is used for query set parameter for an appointed channel.
Query Syntax
SETUP:CH? <ch>
Parameter
there
,
<ch> 1~10 (AT4610/AT4710)
Return
<Channel NO.>,{0(OFF),1(ON)},<Type>,<Range>,<Lower limit Value>,<Upper Limit
Value>
Example
SEND
> SETUP:CH? 1
<NL>
//Query setup parameter of CH1
RET>
01,1,TC-K,100
°C
,-1.0000e+002,+1.0000e+002
11.5.2
SETUP:CH:EN
SETUP:CH:EN Is used for turning on/off an appointed channel.
Command syntax
SETUP:CH:EN <ch>,{0,1}
Parameter
there,
<ch> 1~10 (AT4610/AT4710)
{0,1}
0
：
OFF, 1
：
ON
Example
SEND
> SETUP:CH:EN 1,0
<NL>
//turn off display of CH1
Query syntax
Reference 11.5.1 SETUP:CH?
11.5.3
SETUP:CH:TYPE
SETUP:CH:TYPE Is used for setting current channel type.
Command syntax
SETUP:CH:TYPE <ch>,<type>
Parameter
there
,
<ch> 1~10 (AT4610/AT4710)
<type> types are as followings
：
TC-K,TC-J,TC-E,TC-T,TC-N,TC-S,TC-B,TC-R,RTD-3W,RTC-4W,DC-V,DC-R
Example
SEND
> SETUP:CH:TYPE 1,DC-V
<NL>
//setup as DC-V
Query syntax
Reference 11.5.1 SETUP:CH?
On <DATA LOG> page, if logging has been started up, this command is invalid.
11.5.4
SETUP:CH:RANGE
SETUP:CH:RANGE Is used for setting Range of current channel type.
Command syntax
：
SETUP:CH:RANGE <ch>,<rangeno>
Parameter
：
there,
<ch> 1~10 (AT4610/AT4710)
<rangeno> please refer to Setup section in <SETUP> page
Example
：
SEND
> SETUP:CH:RANGE 1,1
<NL>
//Setup CH1’s Range as 1
Query syntax
：
Reference 11.5.1 SETUP:CH?
On <DATALOG> page
,
if logging has been started up, this command is invalid.
11.5.5
SETUP:CH:LIMIT
SETUP:CH:LIMIT Is used for setting graph’s lower/upper limit on <DATALOG> page.
Command syntax
SETUP:CH:LIMIT <ch>,<lower>,<upper>
SETUP:CH:LIMIT <ch>,range
Parameter
there,
<ch> 1~10 (AT4610/AT4710)
