Applent Instruments Anbai AT510, User Manual

Page: 12 / 28

12
AT510x DC Resistance Meter
Comp
Rate
Comparator 30mV Limit I-Mode Relative
Clear

-%
Figure 3‐3 Keypad II
Range
Remote
Data
Key Lock Beeper
j
Brightness
0
.
+/-
1 2 3
4 5 6
7
8 9
Trig
Esc Enter
p
n m
k

M G
Trigger
Beep
Hold
←

Table 3‐2 Primary Functions description
Key Function
Comparator Setup comparator

-

%
*The function is invalid.
Speed Measurement speed: （ Slow ） , （ Medium ） , （ Fast ） .
Clear Correction(Short Zeroing)
Range Automatic, Range Hold. The AUTO indication is ON, range is automatic.
DH
Data maintained. Equipment to stop testing, current measurements remains on the
displayer, not to refresh. The DH indication is ON, the data is held.
Beep Turn ON/OFF Beep.
<,> Arrow keys Select the range. It is enabled in the range hold status.
Esc Return to the upper status. It is enabled in the setup status.
Enter Confirm the operations. It is enabled in the setup status.
． 2 Secondary Function （ Shift ）
ASSUMER
：

On the front Panel:
Orange Words on Panel represents 2
nd
Function;
The keys will be 2
nd
function while the Shift mark on VFD is on.
Table 3‐3 Secondary Functions description
Key Function
Comparator Open or close comparator function.
20mV-limited *The function is invalid in these AT510x versions.
Test Current Modes
Select test current modes:
High current
（
H-Cur
）、
Low current
（
L-Cur
）
and Plus current
（
P-Cur
）
Relative Value Relative value display. The REL indicator is ON, the value is the Correction value.
Clear Correction(Short Zeroing)
Temperature Correction Used to set the compensation coefficient and temperature.
Brightness Adjust VFD Brightness
p,n,

,m,k,M Unit. Select the unit in the input status.
Key Lock
Keypad Locked. Keypad locked, only Shift + keypad lock (KeyLock) button can
respond.
Beep Setup beep’s on/off.
Remote Control Choose interfaces: RS232, GPIB and setup communication parameters.
Trigger Choose Trig modes: internal, external, manual and remote.
． 3 Numeric Keys
ASSUMER
：


On the front Panel:
Blue Words on Button represents Numeric Key.
The numeric keys include blue word keys, ESC key, Enter key and units (p, n,

,m,