600840-000031 Stratus ES/ESG Installation Instructions
Rev. 2.1
Last Revised: June 22, 2017
Page 36 of 44
6.2.
Event indicators
When certain events occur, an indicator will appear on your Stratus ES/ESG display. The table
below describes each
indicator’s meaning.
Indicator
Meaning
ADS-B transmission contains GPS position information with a radius of
containment under 1 nautical mile.
A response was transmitted from a mode A/C/S interrogation. The indicator
will time out if another reply does not occur within one second.
A built-in-test (BIT) has failed. See Section 4.19.9 of this document and the
Stratus ES/ESG
Pilot’s Guide (600890-000049) for more information about
BIT failures.
Table 26: Event indicators
6.3.
FUNC key
Press the
FUNC
key or the arrow keys, to switch from the Default screen to the Pressure
Altitude screen, GPS screen, Flight ID screen, and Brightness screen. These screens are
described below:
Pressure Altitude screen
: Displays the current pressure altitude. If no valid altitude is detected
or Stratus ES/ESG is in On mode, the altitude field will be replaced by dashes.
Figure 5: Pressure Altitude screen
GPS screen
: D
isplays the aircraft’s GPS position in degrees latitude and longitude. If no GPS
signal is being received, the latitude and longitude fields will be replaced by dashes.
Figure 6: GPS screen
Flight ID screen
: Displays the currently entered Flight ID.
Figure 7: Flight ID screen
