HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700
EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 428399
ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036
CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218
TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460
www.andersonpower.com
Crimp jaws
Adjusting screw with
0.01 mm tolerance
Scale indicating 0.2 mm
tolerance
Handles
(fixed & movable)
End stop
Operating Instructions
4 Indent Crimp Tool
Designed and manufactured pursuant to state-of-the-art technical requirements and latest safety standards,
this four indent crimp tool PM1000G1 is to be used only when in good working order and in strict compliance
with existing safety rules.
The PM1000G1has been developed for crimping of both male and female turned contacts. The tool is only to
be used for the application described below. The manufacturer is not liable for damages caused by improper
use or unauthorized technical modifications of the tool. The tool consists of a movable handle with precision
ratchet mechanism, a fixed handle with a metric scale, an adjustment system by micro setting of 0.01 mm
tolerance, four indenter jaws and a 12 position locator, fully rotatable, for accurate positioning of contacts. A
reference table, marked onto the crimp tool’s surface, informs on the locator position and crimp depth to be
selected to match a particular contact. The tool can be adjusted to any crimp depths that might be requested
by the contact manufacturer.
PM1000G1
Manner of operation
The four indent crimp tool PM1000G1 has been developed for optimal crimping of turned contacts for wire ranges 0.14 to 6.0 mm² (26 through 10
AWG). The reference table indicates the correct locator position to be selected and the crimp depth to be adjusted for the contact to be crimped.
The contact is then inserted through the entry hole of the tool on the opposite side of the locator. The contact is fixed by closing the handles to the
first lock-in position thus preventing the contact falling out of the tool and facilitating insertion of cable into the contact. The precision ratchet
assures consistently accurate crimps every time by forcing the tool to be closed to its
fullest extent
, completing the crimping cycle before the
tool opens automatically.
12 Position
Position
Contact Designation
1
PM16SxxxxS32
2
PM16PxxxxS30
3
PM16PxxxxA30
4
PM16PxxxxB30
5
PM16PxxxxC30 PC16SSN
6
SC20LGN
Position
Contact Designation
7
PC20SGN
8
PC20FGN
9
SC20-GN
10
PC12LSN
11
PC12FSN PC12SSN SC16-SN
12
SC12-SN
Locator Contact Positions
