USER MANUAL / INSTALATION
INSTRUCTIONS
T8 LED tubes
T8LED9WWG-G13, T8LED9WHTG-G13,T8LED9NWG-G13,
T8LED18WWG-G13, T8LED18WHTG-G13, T8LED18NWG-G13
II class protection against electric
shock
This product is not designed to work with
dimmers
This product is designed for outdoor or industrial use
(product should be mounted in luminaires of appropriate IP protection against water and
dust penetration)
This product should not be treated as ordinary household waste
(for more information see the "WEEE mark”)
This product meets the requirements of the so-called "New Approach" European Union (EU)
directive
(range of requirements declared by the manufacturer is included in device CE Declaration)
Thank you for the purchase of the goods produced by Apollo Electronics Sp. z o.o.
The present instruction manual comprises important information concerning the product, therefore you should
get acquainted with it prior to start use the product.
Improper mounting and use not in accordance with the user manual can cause product damage and be a threat
of accident
.
Product description:
LED tubes are alternative for traditional fluorescent tubes.
T8 LED tubes can replace fluorescent T8 tubes with base G13 in luminaires with magnetic (KVG) or electric
(EVG) ballast.
Product can’t be mounted in luminaire directly after taking out fluorescent tube. Use of LED tube is acceptable
only after the adaptation of a luminaire with necessary modifications to the electrical circuit (see:
‘Information
of installation and use’) . This T8 LED tubes are designed for outdoor or industrial use. T8 LED tubes are not
dedicated to work with dimmers or luminaires with emergency lighting modules.
Information of installation and use:
1. All modifications of luminaire and LED tube installation should done by a licensed electrician.
2. Damaged/broken
product can’t be mounted in luminaire – utilization see ‘WEEE mark’.
3. Before installation disconnect the power supply of luminaire (voltage 230V 50Hz). Making any changes
in luminaire with power supply on cause risk of electric shock.
4. Fluorescent tubes that are in the luminaire should be demounted and utilized according to local
regulations about disposal of electrical equipment (see: “WEEE mark”)
5. Make adaptations of electrical circuit inside luminaire in accordance with below scheme:
Summary of Contents for T8LED9WWG-G13 TEOS
Page 4: ......
