Apollo Smart Color Pro, Operating Manual, Page: 8 / 8

Continued on next page.
7 8
[ Speed ]
[ Reset ]
[ Factory Defaults ]
[
7
]
· To change the motor speed press the SELECT, UP or DOWN button once .
Press the DOWN button twice . “SPd “ will appear . Press the SELECT button to
select speed control mode .
· Press the UP or DOWN button to scroll through the speed options .
· Selecting “=_1_” will set the motor to run at low speed . Use this setting when
the SMART COLOR
®
PRO is being used in situations requiring quiet operation .
· Selecting “=–2–“ will set the motor to run at medium speed .
· Selecting “=¯3¯” will set the motor to run at high speed . Use this setting when
the SMART COLOR
®
PRO is being used in situations requiring fast operation .
· Press the “SELECT” button to set motor speed .
· The SMART COLOR ® PRO has been designed for easy installation and removal of gel string
assemblies . The front cover has been removed for clarity . The SMART COLOR ® PRO has been
designed to allow the front cover to remain in place during the actual process .
· A piece of Apollo Gel Shield is installed on the back of the SMART COLOR ® PRO . The shield
filters out harmful ultraviolet and infrared rays that could damage the gel strings . Be sure this
shield is in place before operating the SMART COLOR
® PRO .
· Factory default setting for the DMX address is “= 001” .
· Factory default setting for fan speed is “=“=¯3¯”, high .
· Factory default setting for the gel string speed is “=“=¯3¯”, high .
· Factory default setting for remote reset is “=no “ .
· Factory default address for remote reset is “=000” .
· To set the remote reset function press the SELECT, UP or DOWN button
once . Press the DOWN button three times . “rSt ” will appear .
· With “rSt “ in the display press the SELECT button .
· Press the UP or DOWN button to scroll through the reset options .
· Select “=no “ when remote reset of the SMART COLOR
®
PRO is not required .
· Select “=YES” when remote reset is required .
· With “=YES” in the display press the SELECT button .
· “When “=000” appears in the display window press UP or DOWN button to scroll
to a valid DMX address chosen to control remote reset . Press SELECT button to
set reset address . When this DMX channel is at 100% for more than 1 second,
the SMART COLOR
®
PRO will reset .
· Be sure that the remote reset address does not duplicate any other active DMX
address in your system .
[ Gel String Information ]
[
8
]
· For best accuracy, place console output in 16 bit mode, output values DMX 0 - 255 .
Console output in percent results in less resolution, and some position shift .
· These values are derived from a SMART COLOR
® PRO 7 .25 with a new gel string . Actual values
required may vary based on gel string age and condition . SMART COLOR ® PRO 5 .25 and
SMART COLOR
®
PRO
10 scroller values should be very close to these values
but may require minor adjustments .
18 FRAMES
1 0 0 Clear Clear
2
016 7 AP6300 Neon Yellow AP6400 Pilsner Yellow
3
032 13
AP7150
Santa Fe Amber
AP7600
Apollo Orange
4 047 19 AP7650 Coral Amber AP7450 Golden Amber
5 062 25 AP7550 Spiced Rum Amber AP8300 Diva Red
6
076 31 AP7600 Apollo Orange AP8350 Bludgeon Red
7
091 36
AP8250
Vixen Red
AP8750
Hot Pink
8 106 42 AP8450 Spanked Pink AP3150 Sour Grape
9 120 47 AP8750 Hot Pink AP3700 Groovy Grape
10
134 53 AP3250 Dominant Lavender AP3900 Voodoo Lavender
11
148 59
AP3700
Groovy Grape
AP4450
Heavenly Blue
12 163 64 AP4800 Ice Blue AP4250 Apollo Blue
13 178 70 AP4450 Heavenly Blue AP4200 Bright Blue
14
193 76 AP4400 After Hours Blue AP4950 Caribbean Blue
15
208 82
AP5960
Magarita Green
AP5500
Neptune Blue Green
16 223 88 AP5500 Neptune Blue Green AP5400 Rock’ N Roll Green
17 239 94 AP2000 Apollo Blue Full CTB AP4300 London Blue
18
255 100 AP7630 Peach My Interest AP6200 Banana Yellow
DMX
Value
0 - 255
Theater
Gel String
Rock’ N Roll
Gel String
Console
Value
%
Frame
Position
· Place the gel
string and two
gel rollers
inside the
SMART COLOR
®
PRO.
· Line up the left roller with the
top guide pin. Push the gel
roller toward the top of the
SMART COLOR
®
PRO.
· Swing the bottom of the gel
roller towards the hub drive.
· Line up the bottom of the gel roller over the hub drive.
· Rotate the hub drive until the pin seats fully in the
bottom of the gel roller.
· Repeat the process for the right gel roller.
· Gel Frame Dimensions
S
MART COLOR
®
PRO 5.25
Exterior Frames 15”(W) x 6.025”; (H) 381mm(W) x 153mm(H)
Interior Frames 12”(W) x 6.025”; (H) 305mm(W) x 153mm(H)
SMART COLOR
®
PRO 7.25
Exterior Frames 15”(W) x 8”(H); 381mm(W) x 203mm(H)
Interior Frames 13”(W) x 8”(H); 330mm(W) x 203mm(H)
SMART COLOR
®
PRO 10
Exterior Frames 19”(W) x 10.75”(H); 483mm(W) x 273mm(H)
Interior Frames 16”(W) x 10.75”(H); 406mm(W) x 273mm(H)