36 Brookside Road, Havant
Hampshire, PO9 1JR, UK.
Tel: +44 (0)23 9249 2412
Fax: +44 (0)23 9249 2754
Email: [email protected]
Web: www.apollo-fire.co.uk
MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2015
Cert/LPCB ref. 010
Assessed to ISO 14001:2015
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
CT
TION
© Apollo Fire Detectors Ltd 2022
All information in this document is given in good faith but Apollo
Fire Detectors Ltd cannot be held responsible for any omissions
or errors. The company reserves the right to change the
specifications of products at any time and without prior notice.
PP5106/2022/Issue 1
Page 1 of 4
The RW1500-210APO / RW1500-220APO is a wireless
analogue addressable interface and a conventional open-
area wall sounder VAD that can be used as a stand-alone
notification device.
REACH Wireless
®
Open-Area Wall Sounder VAD
Product information
• Compatible only with REACH Wireless
• 16 tone pair settings (primary and secondary for alert
and evacuation), selectable via on-board DIL Switches
• Four Volume Settings
• Bi-directional wireless communication
• Dual channel redundancy
• Four year battery life
• Five year product warranty
Product overview
Product
REACH Wireless Open-Area
Wall Sounder VAD
Part No.
RW1500-210APO (White Body,
White Flash)
RW1500-220APO (Red Body,
White Flash)
Digital Communication
Apollo protocol compatibility is
handled via the Loop-Interface device,
RW1700-030APO.
See product for more detail.
Number of Tone Pairs
16 (see table 2)
Volume Levels
Four volume settings
Sound Output (Typical)
88 - 91 dBA (tone dependant)
Communication Range
between Loop-Interface and
Devices
100 m (in open space)
VAD Coverage Rating (EN54-
25)
Configurable - See Table 4
Flash Rate
0.5 Hz
Field Device Radio Frequency
Channel Pairs
22 pairs
Radiated Power
14 dBm (25 mW)
Battery Type
2x VARTA CR123A Lithium 3 V,
1250mAh typical
Battery Lifespan
Five years in normal operation with
good signal strength (no dropped
messages)
Operating Temperature
-10°C to +55°C
Maximum Relative Humidity
(non-condensing)
95%
IP Rating
IP 35 (Type B Indoor Use)
Standards and approvals
EN54-3, EN54-23, EN54-25
Dimensions
126 mm diameter x 132 mm height
x 125 mm depth
Weight (including base and
batteries)
350 g
Technical data
All data is supplied subject to change without notice. Specifications
are typical at 24 V, 25°C and 50% RH unless otherwise stated.
Approvals
