4
OUT tray
OUT tray removed for loading cards
Paper-width Adjuster
Paper-length Adjuster
Card guide in up position
Single envelope slot
To print…
You need to…
Envelopes
Single envelope
1. Slide the envelope, with its flap up and on the right, evenly into
the single envelope slot until it stops.
2. Choose print settings that match the type and size of the
envelope.
3. Print the envelope.
4. Reset the software for the paper in the IN tray after printing
completes.
Stack of up to 20 envelopes
1. Slide out both of the paper adjusters.
2. Remove any paper from the IN tray.
3. Slide the envelopes, with the flap side up and on the right, evenly
into the IN tray.
4. Slide paper adjusters snugly against the edges of the envelopes.
5. Choose print settings that match the type and size of the
envelopes.
6. Print the envelopes.
7. Reset the software for the paper in the IN tray after printing is
completed.
Index cards and postcards
1. Remove the OUT tray.
2. Raise the card guide.
3. Insert up to 1/4 inch (1/2 cm) stack of cards into the IN tray. Align
the right edge of the stack with the card guide.
4. Slide the paper adjusters snugly against the edges of the cards.
5. Replace the OUT tray.
6. Choose print settings that match the type and size of the cards.
7. Print the cards.
8. Reset the software for the paper in the IN tray after printing is
completed.
Printing on Different Kinds of Paper
