Apollo Mini-Mist PRO Deluxe T100, Instruction Manual

Page: 8 / 13

8
5 Spraying
a.
You are now ready to begin misting.
b.
The ON/OFF Switch is located under the carry handle of the T100 Turbo Unit. Turn it on. You will hear a sound
similar to a vacuum cleaner. You may also notice that air is now blowing out of the front of the
spray gun. This is correct. Air will continually flow through the air cap located in the front of the spray gun as long
as the T100 Turbo Unit is running and the air hose is connected.
c.
Open the Solution Flow Knob as described in item 4.
d.
Set the mist pattern you wish to use by adjusting the air cap to the desired position. Refer to Mist Pattern
Diagram.
e.
Direct the Spray Gun to the area of the body that you want to start spraying.
f.
Pull back on the trigger (#13) and move the Spray Gun as noted in the diagram below. Do not wave the
Spray Gun back and forth in front of your client by bending your wrist. Rather, keep your wrist straight and move
your entire arm. Movement should be steady, even and deliberate, keeping your distance the same at all times.
PROPER MISTING TECHNIQUE