Installation
28
Apollo GX50/60/65 Installation Manual
appropriate altitude and over all normal flight attitudes. Performance should be checked using
low, high, and mid band frequencies.
F
INAL
S
YSTEM
C
HECK
The GX50/60/65 GPS navigation functions should be complete at this time. The final check
includes checking database, entering a direct to waypoint, and checking the navigation
functions. Start with the unit turned on and operating in the normal mode. Refer to the user’s
manual for operating instructions.
1.
Verify a valid position is displayed.
2.
Check the database to ensure it is for the right coverage area and check the expiration
date. To check the database:
a)
Press
SYS
, rotate the
LARGE
knob to the “S
YSTEM
I
NFO
” page, and press
ENT
.
b)
Rotate the
LARGE
knob to the Apollo GX “S
OFTWARE
V
ERSION
” page
c)
Rotate the
SMALL
knob to display the database information. The database name,
expiration date, and version will be displayed.
3.
Enter a direct to waypoint. Press the D
IRECT
-T
O
button, use the
LARGE
and
SMALL
knobs
to select a nearby waypoint, then press
ENT
. Or use the nearest search function to select
a waypoint.
4.
Verify the bearing and distance to the selected waypoint.
If the database is expired, or if a different coverage area is needed, contact the II Morrow
factory for an update.
Summary of Contents for GX50
