Setting up
1.
The Sound Panel Plus must be attached to a solid wall using
fixings appropriate to the construction of the solid wall.
2.
Attach the metal bar to the wall, ensuring accurate measure-
ments. The Sound Panel Plus should be hung on this bar once
it is attached to the solid wall correctly.
3.
Ensure that the power cable from the Sound Panel Plus is
plugged into a suitably grounded socket. There should be no
tension in the power cable.
4.
The Sound Panel Plus is now ready to use. The Sound
Panel Plus is activated by sound, simply clap, stomp, shout
or play your own music to activate the coloured lights.
5.
There are a variety of visual modes on the Sound Panel
Plus. Simply switch between the modes by using the white
button found on centre of the panel.
6.
You can also adjust the sensitivity and the brightness by
turning the two knobs that are located to the right side of
the white button.
7.
If you have an external microphone that you want to use
to further interact with the Sound Panel Plus, simply plug
this in to the socket on the left hand side of the panel.
When you speak through the microphone the panel will
react to the noises you make.
Page 4
