Apogee X-FireWire Card, Owner'S Manual

Page: 25 / 32

X-FireWire – User’s Guide
19
Working with OS X (continued)
Troubleshooting
Symptom – The X-FireWire card is not appearing in Audio Midi Setup
Solution - If you’re computer is equipped with FW800 connections, be sure you’re connecting the X-
FireWire card to the computer with a FW800 cable.
Open
System Profiler (Applications>Utilities), and click on FireWire (under Hardware ). You should
see the following display.
Symptom – The card is recognized correctly in Audio Midi Setup, but audio is not passing to or from
my audio application.
Solution – In order to assure lock of the FireWire buss, toggle the Format sample rate in Audio Midi
Setup.
Symptom - The X-Firewire card is not recognized when I connect it to my Firewire PCI card.
Solution - Firewire PCI cards are not supported at this time. Connect the X-Firewire card to a com-
puter chassis Firewire port.
Symptom - My X-Firewire card won’t update, or isn’t recognized by the Firewire Updater.
Solution -Unmount and remove all other Firewire devices attached to same Firewire buss as the X-
Firewire card.