APOGEE ELECTRONICS
19
AMBus FireWire card
– User’s Guide
Installing the AMBus FireWire Card
Your AMBus FireWire card should include the following:
1 AMBus FireWire card
1 user’s guide
1
Remove the plate cover of an available Ambus slot.
2
Locate the card between the guides.
3
Gently press on the back panel of the card until you feel it
mate with the AMBus connector.
4
Fasten the card in place with the included screws.
A NOTE ABOUT UPDATING THE AMBus FireWire CARD
Due to the space constraints associated with AMbus card slots,
the MIDI connector necessary for performing firmware upgrades
on the AMBus FireWire card was removed prior to shipping.
Please contact Apogee in the event that you need to update
your card. Additionally, do not forget to register your AMBus
FireWire card so that you may be notified of any updates.
1
2
3
4