12
5. Getting Started
After closing the battery cover, the Personal Tracker will power up and
automatically attempt to register to GSM network.
Provided that your device is positioned in an area with clear un-obstructed
view of the sky, the device will start scanning for GPS satellites to obtain its
first GPS lock. This first fix can take several minutes.
Your device has been preconfigured with Control Base server information
from factory. Five minutes after first power up, the device will automatically
attempt to connect to the Control Base in order to activate your user account
and send first position and status details.
To use all communication and tracking features of the device and if your
service plan provides these, you may modify optional account information
and device setup parameters from the Tracking Websites. Please refer to
your Tracking Web or software guide to do additional account and device
configurations.
The following additional user information and device configurations can be
setup from the Tracking Websites (amongst others):
c
User Name: This name will appear to identify the device when you
receive GPS location and alarm notifications
d
Contact 1, 2, 3:
Phone numbers of authorized contact persons to
remote control security features and receive alarm
notifications.
e
Geo-Fence: You can load up to 4 restricted areas (Geo-fences) to the
device and receive alarm notifications in case of violations
f
Speed Limit: You can define a speed limit to receive alarm notifications in
case of exceeding.
g
Power Saving Modes: To save battery power, you can configure your
device with different power saving modes.
13
6. Phone Operation
The Personal Tracker allows you to receive and accept phone calls and
quick-dial to three preset phone numbers (contact numbers).
Make a Phone Call
Select and press the button for the
contact number you want to call. (You
will have to setup contact numbers
through your online Tracking Web and
load to the device prior to operation).
Press the Send button to quick-dial to
the contact number you have selected.
To end a call, press the Send button or
any of the Contact number buttons
again.
Receive Incoming Calls
Press the Send button or any of the
Contact number buttons to accept an
incoming phone call.
To end the call, press the Send button
or any of the Contact number buttons.
NOTE: The Personal Tracker’s first 8 seconds of ring time (ca. 2-4
rings) are reserved for the Single Location Request function.
The ring tone will only be audible at the device after this period.
Send /
Hang-up
Receive Call / Hang-up
Contact Numbers 1, 2, 3
