3 of 6
APM CO., LTD
AAMS226
․
Standard compliance
- IEEE 802.3 10Base-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100Base-TX Ethernet (twisted-pair copper)
- IEEE 802.3ab 1000Base-TX Ethernet (twisted-pair copper)
- IEEE 802.3z 1000Base-X Ethernet
- IEEE 802.3x flow control capability
- ANS/IEEE 802.3 auto-negotiation
- IEEE 802.1q VLAN
․
Subscriber Interface
- 24 10/100Mbps and 2 Gigabit Ethernet ports
- Port 25,26 are Gigabit TP/SFP Fiber auto sense
Auto-Negotiation and Auto-MDIX
Backpressure flow control for half duplex.
802.3x flow control for full duplex.
connector: 24 RJ-45 abd 2 dual media, RJ-45/SFP
․
Performance Switching capacity:
Non-blocking switch fabric supports up to 24FE + 2GbE ports
8 K MAC addresses
256K packet buffer and 128k control memory
The maximum throughput is 8.8Gbps
With 64 bytes packets throughput is 6.547Mbps
Store and Forward port-Pair Latency is less 5 microseconds with any Ethernet packet length
․
VLAN
Supports SV/IVL configuration to meet your VLAN requirement
Port-base VLAN
IEEE802.1q tag-base VLAN, 4094 max, up to 256 active VLANs including
static plus dynamic entry
IEEE802.1q tag-base VLAN
Flooding unknown vlan frame setting, can flood packet with some vlan
In tag-base VLAN, supports egress/ingress packet filter
Q-in-Q is an efficient method for enabling Subscriber Aggregation
VSM(Virtual Stacking Management)
Up to 16 switches can be managed via Single IP
Virtual stacking, no extra stacking hardware is required
Distributed stacking, no physical ventral wiring closet is needed
22F-6, No.180, Jingping Rd.,Jhonghe City, Taipei County 23581, Taiwan, R.O.C.
www.apm.com.tw [email protected] Tel: +886 2 8943 1966 Fax: +886 2 8943 4944
