Operation
Setup procedure
3DLevelScanner Operating Instruction. © 2009 APM all rights reserved
22
2.
S
elect the
Basic setup
menu with
[–>]
and con
fi
rm with
[E]
.
N
ow select the
Empty Calibr. with
[–>]
and con
fi
rm with
[E]
.
The "
Empty calibr.
" menu
is
displayed
.
empty calibr.
005
6.500 m
distance flange
to min. level
This function is used to enter the distance from the flange (reference point of the
measurement) to the minimum level (=zero).
E
nter the requested parameter via the appropriate keys
,
save your settings and move
on to the next menu item with the
[E]
key
.
Figure 9: Empty and Full Calibration
3.
E
nter the appropriate distance value in DU
(
corresponding to the percentage
value
)
for the empty vessel
(
e
.
g
.,
distance from the sensor to the vessel
bottom
).
4.
Save the settings by pressing
[E]
and move on to
"
Full Calibr
"
.
