Aplus 400, Manual, Page: 4 / 32

Aplus RC Trading Company LTD.
3. You are now ready to turn ON both the transmitter (remote control) and the receiver (located on the helicopter).
Make sure the helicopter is placed stably leveled on the ground before commencing. Always turn on the receiver
first, prior to turning on the transmitter (remote control).
4. Test and confirm the directional controls are working properly. Try moving the directional stick and study the
resulting effects of the helicopter. If no resulting movement is noticed when moving the directional stick, do not
attempt flight; as either the helicopter or remote control may be defective.
5. Before test-fly, better tie the heli model to a fixed place under safe conditions, and then gradually increase its
power, making it perform various movements frequently till at least one battery is used up in order to make the
parts fit smoothly. After that, check the heli to see if there is any screw loose and make sure all the screw are
tightly fixed.
The following lists the most recommended methods for a beginner to commence their journeys into remote control
flying realm. (Listed in order of importance)
1.
Find an experienced Instructor – mostly can be found at your local hobby store.
2. Join a RC club in your nearby area – can be found through the internet, hobby stores, parks, and friends (word of
mouth).
3. Practicing the “Frog Jump” (will be explained later).
Never start flying without implementing any or all of the recommended methods listed above.
“Frog Jump”
1.
Make sure you are standing directly behind the helicopter before any attempted flight.
2. Slowly introduce power to the helicopter in a continuous and stable pace.