EN.IO.APC.APR.ALW
Revision 02.A.005/2020.06
11
2. SAFETY
−
The installation and start-up of the device and any activities related to operation shall be
carried out after thorough examination of the contents of user
’s manual and the instruc-
tions related thereto;
−
installation and maintenance should be carried out by qualified staff having the required
authorizations to install electrical and measuring devices;
−
the device shall be used according to its intended purpose in line with the permissible
parameters specified on the nameplate (
➔
−
the protection elements used by the manufacturer to ensure transmitter safety may be
less effective if the device is operated in a manner not consistent with its intended pur-
pose;
−
before installing or disassembling the device, it is absolutely necessary to disconnect it
from the power source;
−
no repairs or alterations to the transmitter electronic system are permitted. Assessment
of damages and possible repair may only be performed by the manufacturer or author-
ized representative;
−
do not use instruments if damaged. In case of malfunction, the device must be put out of
operation;
−
in case of transmitters equipped with factory-mounted process connector of C and CR
type, it is unacceptable to loosen the fixing screws of the connector cover.
Summary of Contents for 0005 0004 0006 0000 0000 0002 0001 72
Page 35: ......
