18
English
5 Special functions
G sensor
The Dashcam is equipped with a G sensor. If the camera detects accelerations,
delays or special movements (e.g. in the case of a collision or an unexpected ac-
celeration), the recording starts and the recorded video material is protected from
overwriting.
Alternatively, you have the option of protecting the latest recording by pressing the
"Lock" key . Press the key again to switch off the function.
Movement detection
The motion detection should not be activated during driving. This mode is basically
meant for video surveillance while the car is parked in a street for instance. In this
case, ensure that power is supplied to the Dashcam by an external power source,
e.g. a power bank. The Dashcam registers each and every motion in front of the
camera and records it automatically. To enable the motion detection, select the
sub-item "Motion detection" in the main menu and enable the function. Press the
"OK" key to start the motion detection. After 10 seconds, the camera starts going
into the motion detection "standby" mode. A yellow spot flashes in the upper left
half of the display. When a motion is detected, the camera automatically switches
over to the video mode and records the corresponding movements.
Loop recording
In this mode, the Dashcam records a video. Whenever the memory space is com-
pletely exhausted, the device begins to overwrite the memory card. This feature
extends the recording time in a limited memory space. In the menu, you can select
the desired duration of the "loop recording" or disable the same.
Media playback via HDMI
Thanks to the miniHDMI interface, it is possible to playback the contents of the
SD card on a TV.
