Aplex ARCHMI-9 Series User Manual Download Page 96

Page: 96 / 113

ARCHMI-9XX Series User Manual

Step 14.

Click

Yes

to do 4 point calibration.

5.2

Software Functions

5.2.1 Software Functions(Resistive Touch)

Upon rebooting, the computer automatically finds the new 6000 controller board.

The touch screen is connected but not calibrated. Follow the procedures below to

carry out calibration.

1. After installation, click the PenMount Monitor icon “PM” in the menu bar.

2. When the PenMount Control Panel appears, select a device to “Calibrate.”

PenMount Control Panel(Resistive Touch)

The functions of the PenMount Control Panel are

Device, Multiple Monitors

Tools

and

About

, which are explained in the following sections.

Device

In this window, you can find out that how many devices be detected on your system.

Summary of Contents for ARCHMI-9 Series


















































































































Search results

Summary of Contents for ARCHMI-9 Series

Reviews:

Related manuals for ARCHMI-9 Series

Brands by name

Popular brands

Aplex ARCHMI-9 Series, User Manual

Search results

Summary of Contents for ARCHMI-9 Series

Reviews:

Related manuals for ARCHMI-9 Series

Brands by name

Popular brands