Aplex AHM-6077, User Manual

Page: 33 / 64

AHM-6077 User Manual 32
ACPI Suspend Type
Use this item to select ACPI suspend type. The optional settings are: S1(POS); S3 (STR).
Power Management
The optional settings are: User Define; Min Saving; Max Saving.
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
DPMS
Initial display power management signaling.
Video Off in Suspend
The optional settings are: Yes; No.
Suspend Type
The optional settings are: Stop Grant; PwrOn Suspend.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the system from a power-saving mode,
use this item to specify the interrupt request line (IRQ) that is used by the modem. You might
have to connect the fax/modem to the motherboard Wake On Modem connector for this feature to
work.
Soft-Off by PWRBTN
Under ACPI (Advanced Configuration and Power management Interface) you can create a software
power down. In a software power down, the system can be resumed by Wake up Alarms. This
item lets you install a software power down that is controlled by the power Button on your system.
If the item is set to Instant-Off, then the power button causes a software power down. If the item is
set to Delay 4 Sec, then you have to hold the power button down for four seconds to cause a
software power down.
EUP Function
The optional settings are: Enabled; Disabled. User can set it as Enabled to select the relative items for