If your door is difficult to close, it will likely create issues
for Lockitron Bolt while locking or unlocking. Weather
stripping and poor door alignment are two of the main
reasons that create jamming issues.
In the case of poor door alignment, using a metal file to
remove material from the interior of the strike plate can
help alleviate jamming significantly (see
Step 6
).
This can also help in the case of excess weather strip-
ping. You may need to push or pull on the door a little
harder in this circumstance in order for Bolt to properly
operate the latch.
...by hand:
The tailpiece of the lock cylinder is rotated in the wrong
direction or wasn’t turned fully to the correct orientation
before installation. Return to
Step 8
and ensure that the
tailpiece is rotated in the correct direction.
...from the app:
BOLT IS JAMMING
BOLT WON’T TURN
TIPS & TROUBLESHOOTING
1
2
3
Ensure that Lockitron Bolt is powered up - remove
and replace a battery, then listen for the boot up
chime.
Verify that Bolt is connected to your app. You
should see a Bluetooth icon in the bottom right
while on the lock screen.
Turn the lock manually and ensure that the state
changes in the app.
If Bolt attempts to turn when sent a command but
doesn’t fully complete its turn, you might need to reset
the clutch or solve a jamming issue (see below).
24
Summary of Contents for TRON201
Page 1: ...LET S GET STARTED INSTALLATION GUIDE ...
Page 32: ......