Packing Instructions
Before packing up the embosser for shipping, please make sure to
reinstall the shipping bolt.
1. Unplug the embosser.
2. Insert the shipping bolt. You may need to tilt the embosser
gently to the side with the buttons until you hear a sliding
sound to allow complete insertion of the shipping bolt.
3. Screw and tighten the shipping bolt securely.
4. Replace tape to hold the lid on the embosser.
5. Reinsert into the original plastic bag and add the side-specific
foam end caps to the embosser.
6. Insert into the shipping box.
PixBlaster
Catalog No. 1-08070-00 • Copyright © 2020
1839 Frankfort Avenue, Louisville, KY 40206
502-895-2405
[email protected] • www.aph.org
3. Connect the speaker to the
PixBlaster embosser.
4. Turn the embosser switch
to ON.
5. Insert the PixBlaster USB
flash drive into a computer,
and follow instructions
provided on the screen to
finish setup.
