Charging the Device
NOTE: Make sure to charge your Chameleon completely prior to
use.
Connect the USB-C end of the USB cable to the USB-C port
located on the left edge of your Chameleon. Very little effort is
required and forcing the connection can damage the cable or the
device.
Connect the other end of the USB cable to the power adapter.
Then plug the power adapter into a power outlet. The USB
connector and power adapter are included with your Chameleon.
Use the provided power adapter for optimal recharge.
Powering On and Off
If your device is charged, press and hold the Power button on the
left edge of the device for approximately 2 seconds to turn on
your Chameleon.
“Starting” should appear on the braille display with a tactile
loading animation that circles during start-up. After a few seconds,
loading is complete. The “editor” application is shown as selected
on the braille display. Your Chameleon is now ready for use.
To turn the device off, press and hold the Power button for 2
seconds.
Navigating Menus
To navigate from item to item in menus, press the Previous
(leftmost) and Next (rightmost) thumb keys, located on the front
edge of your device. As you press the Previous and Next thumb
keys, the menu item changes on the braille display. Each item
represents an application or option you can activate.
To activate a menu item, press one of the Cursor Routing keys.
You can also press the Enter key (Dot 8) on the braille keyboard
to activate a menu item.
